卧式化粪池模具设计样式与特点是以整体式结构为出发点，在卧式化粪池模具加工过程中，每种模具的大小是不固定的，而且直径、壁厚、高度等都是按照具体要求定制的，卧式化粪池不同于立式化粪池，一般壁厚多在10厘米以下。卧式化粪池模具设计样式与特点深受市场的好评，混凝土化粪池模具这几年一直使用的是钢模具，The design style and characteristics of horizontal septic tank mold are based on the integral structure. In the process of horizontal septic tank mold processing, the size of each mold is not fixed, and the diameter, wall thickness and height are customized according to specific requirements. Horizontal septic tank is different from vertical septic tank, and the general wall thickness is less than 10cm. The design style and characteristics of horizontal septic tank mould are highly praised by the market. The concrete septic tank mould has been using steel mould in recent years,
化粪池属于大型设备，有的生产难以满足需要，所以分成三段预制，这样做的目的是减小生产的难度，使生产制作的时候更加便捷，省时省力，完成效率生产。混凝土化粪池模具采用的钢板多达六个厚，筋板也是八个厚的，这样的厚度是为了保证模具的不变形，我们知道，模具一旦变形就很难在进行使用，而且修理的费用很高，变形严重的直接报废，所以在使用化粪池模具的时候选择好模具钢材的质量和厚度是很重要的。生产出的化粪池一般壁厚在十五公分左右，这个厚度既可以保证生产的需要，在使用过程中，收到水流的冲击也不会渗漏，而且在制作上减小了难度。随着科技的不断发展，我们从三格化粪池的使有发展到了卧式化粪池的使用，是市场要求和厂家不算创新的结果，相信在将来，我们会制造出质量更好使用更方便的化粪池。
Septic tanks are large-scale equipment. Some production is difficult to meet the needs, so they are prefabricated in three sections. The purpose of this is to reduce the difficulty of production, make production more convenient, save time and labor, and complete efficient production. The concrete septic tank mold adopts up to six thick steel plates and eight thick rib plates. This thickness is to ensure that the mold does not deform. We know that once the mold deforms, it is difficult to use it, and the repair cost is very high. If the deformation is serious, it will be directly scrapped, Therefore, it is very important to select the quality and thickness of mold steel when using septic tank mold. Generally, the wall thickness of the produced septic tank is about 15 cm, which can not only meet the needs of production, but also will not leak after receiving the impact of water flow in the process of use, but also reduce the difficulty in production. With the continuous development of science and technology, we have developed from the use of three compartment septic tanks to the use of horizontal septic tanks, which is the result of market requirements and manufacturers' non innovation. I believe that in the future, we will manufacture septic tanks with better quality and more convenient use.
